RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
3. To remove the recirculation-air door (1) from the air inlet housing (2), first carefully release the retaining tabs of actuator coupler (3) located on
the inside surface of the air inlet housing and pull the actuator coupler out of the pivot shaft of the recirculation-air door.
NOTE: If the seals on the air door is deformed or damaged, the air door must be replaced.
4. Remove the recirculation-air door from the air inlet housing.
Air Inlet Housing
AIR INLET HOUSING
NOTE: If the seals on the air door is deformed or damaged, the air door must be replaced.
1. Position the recirculation-air door (1) into the air inlet housing (2).
CAUTION: Make sure that the recirculation-air door pivot shaft is properly seated in the pivot seat located in the air inlet housing.
2. Align the actuator coupler (3) with the recirculation-air door pivot shaft and install the coupler until the coupler retaining tabs are fully engaged to
the air inlet housing. Be sure to install the coupler with the coupler arm located between the two stop tabs on the air inlet housing.
