RAM 3500 Chassis Cab Truck 2WD L6-6.7L DSL Turbo (2010)
3. Install the baffle (2) into the air inlet housing (1).
4. Install the air inlet housing onto the HVAC housing See: Removal and Replacement/HVAC Housing - Installation.
HVAC Housing
HVAC HOUSING
CAUTION: Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system See: Service and Repair/Refrigerant Oil Level
. Failure to properly adjust the refrigerant oil level will prevent the A/C system from operating as designed and can cause serious
A/C compressor damage.
NOTE: When replacing multiple A/C system components, refer to the Refrigerant Oil Capacities chart to determine how much oil should be
added to the refrigerant systemSee: Service and Repair/Refrigerant Oil Level .
NOTE: If only the A/C evaporator is being replaced, add 60 milliliters (2 fluid ounces) of refrigerant oil to the refrigerant system. Use only
refrigerant oil of the type recommended for the A/C compressor in the vehicle.
1. Carefully install the A/C evaporator (3) into the upper half of the HVAC housing (2).
2. Install the foam seal (1) onto the tubes of the A/C evaporator.