RAM 3500 HD Truck 2WD L6-6.7L DSL Turbo VIN A (2007)
1. Remove the instrument panel and place it on a workbench.
2. If required, disconnect the center radio speaker wire harness connector (1) and position it the wire harness lead out of the way.
3. Remove the screw (4) that secures the defroster duct adapter (3) to the instrument panel support.
4. Remove the defroster duct adapter from the defroster duct (5).
5. Remove the six screws (2) that secure the defroster duct to the instrument panel.
6. Remove the defroster duct from the instrument panel.
Installation
INSTALLATION
1. Position the defroster duct (5) into the instrument panel.
2. Install the six screws (2) that secure the defroster duct to the instrument panel. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Install the defroster duct adapter (3) onto the defroster duct.
4. Install the screw (4) that secures the defroster duct adapter to the instrument panel support. Tighten the screw to 2.2 Nm (20 in. lbs.).
5. If removed, connect the center radio speaker wire harness connector (1) to the speaker.
6. Install the instrument panel.