Rampage L4-135 2.2L (1983)
15.
Thread adjuster cable over guide and hook end of overload spring in lever. Ensure eye of cable is pulled tight against anchor and in a straight line
with guide.
16.
Install brake drum, tire and wheel assembly.
17.
Adjust brakes. Refer to individual truck chapters for procedure.
18.
If any hydraulic connections have been opened, bleed brake system.
19.
Check master cylinder fluid level, and replenish as necessary.
20.
Check brake pedal for proper feel and return.
21.
Lower vehicle and road test. Do not severely apply brakes immediately after installation of new brake linings or permanent damage may
occur to linings, and/or brake drums may become scored. Brakes must be used moderately during first several hundred miles of operation
to ensure proper burnishing of linings.
