Rampage L4-135 2.2L (1983)
Fig. 9 Removing inner rack oil seal
13. Remove pinion shaft lower seal using tool No. C4694.
14. Remove pinion bearing using a drift or punch, gently tap on bearing until bearing is removed.
15. Remove inner rack seal from rack housing and dispose using tool No. C-4665.
16. Remove and dispose of rack piston ring, inner rack seal, bulkhead seal and bulkhead O ring.
17. Mark breather tube to housing location and remove tube.
Assembly
Fig. 10 Bulkhead oil seal installation
Fig. 11 Installing bulkhead assembly into rack tube
Fig. 12 Pinion shaft seal installation