Rampage L4-135 2.2L (1983)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front Coil Spring Replace
Fig. 7 Strut damper assembly
1. Remove strut damper assembly as outlined previously.
2. Using a suitable tool, compress coil spring.
3. Remove strut rod nut while holding strut rod to prevent rotation.
4. Remove the mount assembly.
5. Remove coil spring from strut damper.
6. Inspect mount assembly for deterioration of rubber isolator, retainers for cracks and distortion and bearings for binding.
7. Install the bumper dust shield assembly.
8. Install spring and seat, upper spring retainer, bearing and spacer, mount assembly and the rebound bumper, retainer and rod nut upper. Position
the spring retainer alignment notch parallel to the damper lower attaching brackets.
9. Torque strut rod nut to 60 ft. lbs. (81 Nm). Do not release spring compressor before torquing nut.
10. Remove spring compressor.