Wheel Bearing: Adjustments
- Make
- Dodge
- Model
- Rampage
- Engine
- L4-135 2.2L
- Year
- 1983
- Section
- Suspension › Wheel Bearing › Adjustments
Steering and SuspensionAdjustments · page 1 of 4
Wheel Bearing: Adjustments
Fig. 7 Wheel Bearing Assembly
1. Raise and support rear of vehicle.
2. Torque adjusting nut to 270 inch lbs. while rotating wheel.
3. Stop wheel and loosen adjusting nut.
4. Tighten adjusting nut finger tight. End play should be 0.001 - 0.003 inch.
5. Install castle lock with slots aligned with cotter pin hole.
6. Install cotter pin and grease cap.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
The same page in: Rampage L4-135 2.2L (1983), Rampage L4-135 2.2L (1983), Rampage L4-135 2.2L (1983).
Parts & tools for this job For 1983 Dodge Rampage 2.2L
- PARTWheel bearingSearch: Dodge Rampage 1983 2.2L wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Dodge Rampage 1983 2.2L cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.