Rampage L4-135 2.2L (1983)
Fig. 36 Outer C/V joint disassembled
1. If removed, position wear sleeve on joint housing, then tap sleeve onto housing, using tool No. C-4698.
2. Lightly oil components, then align marks made during disassembly.
Fig. 42 Cage & cross assembly. Outer C/V joints
3. Align one of the inner race lands with elongated window of cage, then insert race into cage and pivot 90°.
4. Align elongated cage windows with housing land, then pivot cage 90
Fig. 43 Cage & cross assembly installed in housing. Outer C/V joints
°. The curved side of the elongated cage windows and inner race counterbore should face outward from joint.
5. Lubricate ball races with one packet of grease from kit.