Rampage L4-135 2.2L (1983)
Fig. 40 Cage & cross assembly removal. Outer C/V joints
Fig. 41 Removing cross from cage. Outer C/V joints
10. Press downward on one side of the inner race to tilt cage and remove ball from opposite side. If joint is tight, use a hammer and a brass drift to tap
inner race. Do not strike the cage. Repeat this step until all six balls are removed. A screwdriver may be used to pry the balls loose.
Fig. 40 Cage & cross assembly removal. Outer C/V joints
11. Tilt the cage assembly vertically and position the two opposing, elongated cage windows in area between ball grooves. Remove cage and inner
race assembly by pulling upward from the housing.
