Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
8. Remove the crankcase ventilation valve (CCV) and breather tube.
9. Disconnect the fuel return line.
10. Disconnect the fuel supply and return lines at the right cylinder head cover.
11. Disconnect the camshaft position sensor (CMP) and fuel injector wiring and position the right engine wiring harness aside.
12. Pull out on the fuel injector return fuel hose retainers, disconnect the hoses and position aside.
13. Remove the right fuel injectors.
14. Remove the air conditioning (A/C) / heater hose bracket.
15. Remove the oil level indicator tube retaining bolt.
16. Remove the EGR air control valve assembly resonator.
17. Remove the vacuum pump (4).
18. Remove the cylinder head cover retaining bolts and remove cover.