Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
Valve Cover: Service and Repair
Installation
Left
LEFT
1. Clean and inspect all sealing surfaces.
NOTE: Care must be taken not to get any engine sealant on the camshaft journals of the cylinder head cover.
2. Install a 1/8 in bead of Mopar(R) Engine RTV Gen II sealant to the underside of the cylinder head cover.
3. Carefully position the cylinder head cover and install the bolts into their original position.
CAUTION: The cylinder head cover bolts are different lengths. Do not use the wrong length bolts or engine damage may result.
4. Tighten cylinder head cover bolts in sequence, first to 4 Nm (35 in. lbs.), and then repeat the sequence to 8.4 Nm (75 in. lbs).
