Sprinter 3500 L5-2.7L DSL Turbo (2004)
Side Curtain Airbag Remove
11. Disengage the lug that secures the side curtain airbag bracket from within the bore in the roof side rail and remove the unit from the vehicle.
INSTALLATION
The following procedure is for replacement of a faulty or damaged side curtain airbag. If the airbag is faulty or damaged, but not deployed, review the
recommended procedures for handling non-deployed supplemental restraints.. If the side curtain airbag has been deployed, review the recommended
procedures for service after a supplemental restraint deployment before removing the airbag from the vehicle.
1. Position the side curtain airbag into the vehicle as a unit.
Side Curtain Airbag Install
2. Engage the lug that secures the side curtain airbag bracket into the bore in the roof side rail.
3. Install and tighten the screw that secures the rear of the side curtain airbag to the B-pillar. Tighten the screw to 23 Nm (17 ft. lbs.).
4. Install and tighten the screw that secures the front of the side curtain airbag to the A-pillar. Tighten the screw to 9 Nm (80 in. lbs.).
5. Install and tighten the screw that secures the side curtain airbag front tether retainer to the base of the A-pillar near the belt line Tighten the screw
to 5 N m (44 in lbs)
6. Install a new tie wrap to secure the side curtain airbag pigtail wire to the inside of the B-pillar
7. Reconnect the pigtail wire connector for the side curtain airbag to the vehicle wire harness connector on the B-pillar Be certain the connector is