Sprinter 3500 L5-2.7L DSL Turbo (2004)
ACM Cover
7. Locate the Airbag Control Module (ACM) in the right rear corner of the area within the driver side seat riser. Firmly grasp and pull upward on the
molded plastic cover to unsnap it from over the ACM.
Airbag Control Module Remove/Install
8. Remove the three screws that secure the ACM to the bracket that is welded onto the floor panel under the driver side front seat.
9. Lift the ACM upward far enough to access the ACM wiring connection. Depress the release and lift the lever arm to disconnect the vehicle wire
harness connector for the ACM from the ACM connector receptacle located on the left facing side of the module.
10. Remove the ACM from within the driver side front seat riser.
INSTALLATION
1. Reconnect and latch the vehicle wire harness connector for the ACM to the ACM connector receptacle located on the left facing side of the
module.