Sprinter 3500 L5-2.7L DSL Turbo (2004)
2. Remove generator and accessory drive belt Refer to Generator Removal
3. Position Special Tool #8433 into decoupler Align to hex end of generator shaft
Decoupler Removal (Lintens)
4. The generator shaft uses conventional right-hand threads to attach decoupler To break decoupler loose from generator threads, rotate end of tool
clockwise
5. After breaking loose with tool, unthread decoupler by hand from generator.
Litens Decoupler Installation
1. Thread decoupler pulley onto generator shaft by hand (right-hand threads).
2. Position Special Tool 8433 into decoupler. Align tool to hex end of generator shaft.
Decoupler Installation (Litens)
3. Do not use an adjustable, ratcheting "click type" torque wrench. Most "click type" wrenches will only allow torque to be applied in a clockwise
rotation. Use a dial-type or beam-type wrench. Tighten in counter-clockwise rotation. Refer to torque specifications.
4. Install accessory drive belt, and generator. Refer to Generator Installation.
5. Connect negative battery cable.