SRT-4 L4-2.4L Turbo VIN S (2004)
1. Remove upper and lower front timing belt covers.
2. Remove timing belt.
3. Use Special Tool 6847 to hold camshaft sprockets while removing the sprocket bolt(s) (Fig. 134). Remove camshaft sprocket(s).
REMOVAL - CRANKSHAFT SPROCKET
1. Remove upper and lower front timing belt covers.
2. Remove timing belt.
3. Remove crankshaft sprocket using Special Tool 6793 and insert C-4685-C2 (Fig. 135).
INSTALLATION - CRANKSHAFT SPROCKET
CAUTION: The crankshaft sprocket is set to a predetermined depth from the factory for correct timing belt tracking. If removed, use of Special Tool
6792 is required to set the sprocket to original installation depth. An incorrectly installed sprocket will result in timing belt and engine damage.