Stratus L4-2.0L VIN C (1997)
Parking Brake Cable: Service and Repair
Cable Installation
PROCEDURES
Park Brake Cable Removal/Installation At Floor Pan
1. Install park brake cable into floor pan of vehicle making sure sealing grommet is installed in floor pan as far as possible to insure a proper seal.
2. Install park brake cable into the rear brake support plate. Be sure locking tabs on cable retainer are expanded to ensure park brake cable is securely
held in the support plate.
NOTE: The park brake cable routing and routing brackets are different on the right and left side of the vehicle. Be sure the correct routing
brackets are installed on the correct side of the vehicle. The routing brackets will ensure the correct routing of the park brake cable for the side of
the vehicle it is installed on.
Park Brake Cable Routing Brackets (Right Side)
Park Brake Cable Routing Brackets (Left Side)