Stratus L4-2.0L VIN C (1997)
3. Install the 2 park brake cable routing brackets on the right or left side rear frame rail. Install and securely tighten routing bracket attaching bolts.
Park Brake Cable At Actuating Lever
4. Install the park brake cable on the park brake actuating lever of the trailing brake shoe.
Hub/Bearing Assembly Retaining Nut
5. Install hub/bearing assembly on rear spindle. Then install a new rear hub/bearing assembly retaining nut. Torque hub/bearing assembly to spindle
retaining nut to 250 Nm (185 ft. lbs.).
Rear Hub/Bearing Dust Cap
6. Install hub/bearing assembly dust cap, using a soft faced hammer.