Stratus Coupe V6-3.0L VIN H (2001)
STEP 5. Check multi-center display connector C-08 for damage.
Q: Is multi-center display connector C-08 in good condition?
YES: Go to Step 6.
NO: Repair or replace it. Refer to Harness Connector Inspection. The multi-center display should work normally.
STEP 6. Check the harness wires between C-08 and battery.
NOTE: After checking joint connector C-141 and intermediate connector C-209, check the wires. If joint connector C-141 and intermediate connector
C-209 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Is the harness wires between C-08 and battery in good condition?
YES: There is no action to be taken.
NO: Repair them. The multi-center display should work normally.
STEP 7. Check the multi-center display power supply circuit [ignition switch (ACC)] at the multi-center display connector C-08 by
backprobing.