Stratus Coupe V6-3.0L VIN H (2001)
Q: Is front-ECU connector A-09X in good condition?
YES: Go to Step 4.
NO: Repair or replace it. Refer to Harness Connector Inspection. Confirm the DTC 13 is not displayed.
STEP 4. Check the harness wire between front-ECU connector A-09X and battery.
Q: Is the harness wire between front-ECU connector A-09X and battery in good condition?
YES: There is no action to be taken.
NO: Repair it. Confirm the DTC 13 is not displayed.
STEP 5. Check the front-ECU ground circuit at the front ECU connector A-09X.
1. Disconnect the front-ECU connector A-09X and measure at the relay box side.
2. Measure the resistance between terminal 1 and ground.
Q: Is the resistance less than 2 ohm?
YES: Go to Step 8.
NO: Go to Step 6.
STEP 6. Check the front-ECU connector A-09X for damage.
Q: Is front-ECU connector A-09X in good condition?
YES: Go to Step 7.