dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 1915 > < Component Tests and General Diagnostics|Page 1913
Page 68
background image

YES: Go to Step 5.
NO: Replace it. The trunk lid opener function should work normally.

STEP 5. Check the trunk lid opener actuator ground circuit at the trunk lid opener actuator connector F-04.

1. Disconnect the trunk lid opener actuator connector F-04 and measure at the harness side.
2. Measure the resistance between terminal 2 and ground. 

Q: Is the resistance less than 2 ohm?

YES: Go to Step 8.
NO: Go to Step 6.

STEP 6. Check trunk lid opener actuator connector F-04 for damage.

Q: Is trunk lid opener actuator connector F-04 in good condition?

YES: Go to Step 7.
NO: Repair or replace it. Refer to Harness Connector Inspection. The trunk lid opener function should work normally.

STEP 7. Check the harness wire between trunk lid opener actuator connector F-04 and ground.

Q: Is the harness wire between trunk lid opener actuator connector F-04 and ground in good condition? 

YES: There is no action to be taken.
NO: Repair it. Refer to Harness Connector Inspection. The trunk lid opener function should work normally.

Component Tests and General Diagnostics|Page 1915 > < Component Tests and General Diagnostics|Page 1913