dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 1941 > < Component Tests and General Diagnostics|Page 1939
Page 94
background image

3. Measure the voltage between terminal 1 and ground by backprobing.

Q: Is the voltage approximately 12 volts (battery positive voltage)?

YES: Go to Step 5.
NO: Go to Step 3.

STEP 3. Check wiper motor connector A-03 for damage.

Q: Is wiper motor connector A-03 in good condition?

YES: Go to Step 4.
NO: Repair or replace it. Refer to Harness Connector Inspection. The windshield wiper should stop at the predetermined park position.

Component Tests and General Diagnostics|Page 1941 > < Component Tests and General Diagnostics|Page 1939