Stratus Coupe V6-3.0L VIN H (2001)
![background image](/dodge/stratus_coupe/v6-3.0l_vin_h/Page-522136.png)
STEP 4. Check the headlight relay (high).
Q: Is the headlight relay (high) in good condition?
YES: Go to Step 5.
NO: Replace it. The headlights (high-beam) should illuminate normally.
STEP 5. Check the headlight relay (high) power supply circuit at the headlight relay (high) connector A-07X.
1. Disconnect the headlight relay (high) connector A-07X and measure at the relay box side.
2. Measure the voltages between terminal 3, 4 and ground.
Q: Are the voltages approximately 12 volts (battery positive voltage)?
YES: Go to Step 8.
NO: Go to Step 6.
STEP 6. Check headlight relay (high) connector A-07X for damage.
Q: Is headlight relay (high) connector A-O7X in good condition?
YES: Go to Step 7.
NO: Repair or replace it. Refer to Harness Connector Inspection. The headlight (high-beam) should illuminate normally.