dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 1999 > < Component Tests and General Diagnostics|Page 1997
Page 152
background image

YES (only one side illuminates): Go to Step 3. 
NO (no lights flash at all): Go to Step 5.

STEP 3. Check ETACS-ECU connector C-311 and junction block connectors C-303, C-308 and C-310 for damage.

Q: Are ETACS-ECU connector C-311 and junction block connectors C-303, C-308 and C-310 in good condition?

YES: Go to Step 4.
NO: Repair or replace them. Refer to Harness Connector Inspection. The turn-signal lights should flash normally.

STEP 4. Check the harness wires between ETACS-ECU connector C-311 and junction block connectors C-303, C-308 and C-310.

Q: Are the harness wires between ETACS-ECU connector C-311 and Junction block connectors C-303, C-308 and C-310 in good condition?

YES: Replace the ETACS-ECU. The turn-signal lights should flash normally.
NO: Repair them. The turn-signal lights should flash normally.

Component Tests and General Diagnostics|Page 1999 > < Component Tests and General Diagnostics|Page 1997