Stratus Coupe V6-3.0L VIN H (2001)
![background image](/dodge/stratus_coupe/v6-3.0l_vin_h/Page-522195.png)
STEP 6. Check the harness wire between hazard warning light switch connector C-09 and ETACS-ECU connector C-313.
Q: Is the harness wire between hazard warning light switch connector C-09 and ETACS-ECU connector C-313 in good condition?
YES: Replace the ETACS-ECU. The hazard warning light switch input signal should be able to be checked and the functions, which are described in
the "Technical Description (comment)," should work normally.
NO: Repair it. The hazard warning light switch input signal should be able to be checked and the functions, which are described in the "Technical
Description (comment)," should work normally.
Inspection Procedure O-5
The fog light switch signal is not sent to the ETACS-ECU.
Fog Light Switch Input Circuit