Stratus Coupe V6-3.0L VIN H (2001)
STEP 5. Check driver's seat belt switch connector D-15 and ETACS-ECU connector C-313 for damage.
Q: Are driver's seat belt switch connector D-15 and ETACS-ECU connector C-313 in good condition?
YES: Go to Step 6.
NO: Repair or replace them. Refer to Harness Connector Inspection. The driver's seat belt switch input signal should be able to be checked and the
functions, which are described in the "Technical Description (comment)," should work normally.
STEP 6. Check the harness wires between driver's seat belt switch connector D-15 and ETACS-ECU connector C-313.
NOTE: After checking intermediate connector C-210, check the wires. If intermediate connector C-210 is damaged, repair or replace it. Refer to
Harness Connector Inspection.
Q: Are the harness wires between driver's seat belt switch connector D-15 and ETACS-ECU connector C-313 in good condition?
YES: Replace the ETACS-ECU. The driver's seat belt switch input signal should be able to be checked and the functions, which are described in the
"Technical Description (comment)," should work normally.
NO: Repair them. The driver's seat belt switch input signal should be able to be checked and the functions, which are described in the "Technical
Description (comment)," should work normally.
Inspection Procedure O-8
The driver's or passenger's door switch or door switches signal is not sent to the ETACS-ECU.
