dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 2064 > < Component Tests and General Diagnostics|Page 2062
Page 217
background image

STEP 8. Check the passenger's door lock key cylinder switch.

Q: Is the passenger's door lock key cylinder switch in good condition?

YES: Go to Step 9.
NO: Replace it. The input signal from the passenger's door lock key cylinder switch should be able to be checked and the functions, which are
described in the "Technical Description (comment)," should work normally.

STEP 9. Check the passenger's door lock key cylinder switch ground circuit at driver's door lock key cylinder switch connector E-06.

1. Disconnect passenger's door lock key cylinder switch connector E-06 and measure at the harness side.

2. Measure the resistance between terminal 2 and ground. 

Q: Is the resistance less than 2 ohm?

YES: Go to Step 12.
NO: Go to Step 10.

STEP 10. Check passengers door lock key cylinder switch connector E-06 for damage.

Component Tests and General Diagnostics|Page 2064 > < Component Tests and General Diagnostics|Page 2062