Stratus Coupe V6-3.0L VIN H (2001)
![background image](/dodge/stratus_coupe/v6-3.0l_vin_h/Page-522219.png)
STEP 12. Check the passenger's door lock key cylinder switch connector E-06 and ETACS-ECU connector C-312 for damage.
Q: Are passenger's door lock key cylinder switch connector E-06 and ETACS-ECU connector C-312 in good condition?
YES: Go to Step 13.
NO: Repair or replace them. Refer to Harness Connector Inspection. The input signal from the passenger's door lock key cylinder switch should be
able to be checked and the functions, which are described in the "Technical Description (comment)," should work normally.
STEP 13. Check the harness wires between passenger's door lock key cylinder switch connector E-06 and ETACS-ECU connector C-312.
NOTE: After checking intermediate connector C-213, check the wires. If intermediate connector C-213 is damaged, repair or replace it. Refer to
Harness Connector Inspection.
Q: Are the harness wires between passenger's door lock key cylinder switch connector E-06 and ETACS-ECU connector C-213 in good
condition?
YES: Replace the ETACS-ECU. The input signal from the passenger's door lock key cylinder switch should be able to be checked and the functions,
which are described in the "Technical Description (comment)," should work normally.
NO: Repair them. The input signal from the passenger's door lock key cylinder switch should be able to be checked and the functions, which are
described in the "Technical Description (comment)," should work normally.
Inspection Procedure O-10
The driver's or passenger's door lock actuator switch is not sent to the ETACS-ECU.