Stratus Coupe V6-3.0L VIN H (2001)
Connector
CIRCUIT OPERATION
The ETACS-ECU uses the input signal from the driver's, passenger's, rear and back door lock actuator switch to operate the following functions.
TECHNICAL DESCRIPTION (COMMENT)
<Driver's door lock actuator switch>
The input signal from the driver's door lock actuator switch is used to operate the following systems or functions:
-
Central door locking system
-
Forgotten key prevention function
-
Rolling lock function
-
Keyless entry system
-
Interior light dimming function
-
Theft-alarm system
If the signal fails, these systems or function will not work normally.
TECHNICAL DESCRIPTION (COMMENT)
<Passenger's door lock actuator switch>
The input signal from the passenger's door lock actuator switch is used to operate the following systems or functions:
-
Forgotten key prevention function
-
Rolling lock function
-
Theft-alarm system
If the signal fails, these systems or function will not work normally.
TROUBLESHOOTING HINTS
-
Malfunction of the driver's or passenger's door latch assembly
-
Malfunction of the ETACS-ECU
-
Damaged harness wires or connectors
DIAGNOSIS
Required Special Tools:
-
MB991223: Test Harness Set
-
MB991502: Scan Tool (MUT-II)
-
MB991529: Diagnostic Trouble Code Check Harness
STEP 1. Check the location of malfunction.
Q: Which door lock actuator switch signal is not input?
Driver's door: Go to Step 2.
Passenger's door: Go to Step 8.