Stratus Coupe V6-3.0L VIN H (2001)
STEP 11. Check the harness wires between passenger's door lock actuator switch connector E-07 and ground.
NOTE: After checking intermediate connector C-213, check the wires. If intermediate connector C-213 is damaged, repair or replace it. Refer to
Harness Connector Inspection.
Q: Are the harness wires between passenger's door lock actuator switch connector E-07 and ground in good condition?
YES: There is no action to be taken.
NO: Repair them. The input signal from the passenger's door lock actuator switch should be able to be checked and the functions, which are described
in the "Technical Description (comment)," should work normally.
STEP 12. Check the passenger's door lock actuator switch connector E-07 and ETACS-ECU connector C-312 for damage.
YES: Go to Step 13.
NO: Repair or replace them. Refer to Harness Connector Inspection. The input signal from the passenger's door lock actuator switch should be able to
be checked and the functions, which are described in the "Technical Description (comment)," should work normally.
