dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 2082 > < Component Tests and General Diagnostics|Page 2080
Page 235
background image

STEP 13. Check the harness wires between power window sub switch connector E-05 and ETACS-ECU connector C-312.

NOTE:  After checking intermediate connector C-213, check the wires. If intermediate connector C-213 is damaged, repair or replace it. Refer to
Harness Connector Inspection.

Q: Are the harness wires between power window sub switch connector E-05 and ETACS-ECU connector C-312 in good condition?

YES: Replace the ETACS-ECU. The door lock switch input signal should be able to be checked and the central door locking system should work
normally.
NO: Repair them. The door lock switch input signal should be able to be checked and the central door locking system should work normally.

Inspection Procedure O-12

The trunk lid latch switch signal is not sent to the ETACS-ECU.

Component Tests and General Diagnostics|Page 2082 > < Component Tests and General Diagnostics|Page 2080