dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 2086 > < Component Tests and General Diagnostics|Page 2084
Page 239
background image

STEP 6. Check the harness wires between trunk lid latch switch connector F-05 and ETACS-ECU connector C-312.

NOTE:  After checking intermediate connector C-210, check the wires. If intermediate connector C-210 is damaged, repair or replace it. Refer to
Harness Connector Inspection.

Q: Are the harness wires between trunk lid latch switch connector F-05 and ETACS-ECU connector C-312 in good condition?

YES: Replace the ETACS-ECU. The input signal from the trunk lid latch switch should be able to be checked and the functions, which are described
in the "Technical Description (comment)," should work normally.
NO: Repair them. The input signal from the trunk lid latch switch should be able to be checked and the functions, which are described in the
"Technical Description (comment)," should work normally.

Inspection Procedure O-13

The trunk lid lock key cylinder switch signal is not sent to the ETACS-ECU.

Component Tests and General Diagnostics|Page 2086 > < Component Tests and General Diagnostics|Page 2084