Stratus Coupe V6-3.0L VIN H (2001)
STEP 2. Check the windshield wiper and washer switch.
Q: Is the windshield wiper and washer switch in good condition?
YES: Go to Step 3.
NO: Replace it. The input signal from the column switch (windshield wiper and washer switch) should be able to be checked and the windshield wiper
and washer should work normally.
STEP 3. Replacement of ECU
1. Replace the column switch (turn-signal light and lighting switch).
2. The input signal from the column switch (windshield wiper and washer switch) should be able to be checked and the windshield wiper and washer
should work normally.
Q: Is the input signal from the column switch (windshield wiper and washer switch) input normally?
YES: There is no action to be taken.
NO: Replace the ETACS-ECU. The input signal from the column switch (windshield wiper and washer switch) should be able to be checked
and the windshield wiper and washer should work normally.
Inspection Procedure O-17
The windshield intermittent wiper interval adjusting knob signal is not sent to the ETACS-ECU.