Stratus Coupe V6-3.0L VIN H (2001)
STEP 3. Check the harness wire between column switch connector C-203 and ETACS-ECU connector C-313.
Q: Is the harness wire between column switch connector C-203 and ETACS-ECU connector C-313 in good condition?
YES: Go to 4.
NO: Repair it. Check that the input signal from the windshield intermittent wiper interval adjusting knob can be checked and the wiper interval can be
adjusted.
STEP 3. Replacement of ECU
1. Replace the ETACS-ECU.
2. Check that the input signal from the windshield intermittent wiper interval adjusting knob can be checked and the wiper interval can be adjusted.
Q: Is the input signal from the windshield intermittent wiper interval adjusting knob input normally?
YES: There is no action to be taken.
NO: Replace the column switch. Check that the input signal from the windshield intermittent wiper interval adjusting knob can be checked and
the wiper interval can be adjusted.
Inspection Procedure O-18
Transmitter: The lock, unlock, trunk or panic switch signal is not sent to the ETACS-ECU.
Receiver And Transmitter Communication Circuit
CIRCUIT OPERATION
The ETACS-ECU receives an input signal from the transmitter through its built-in receiver, and evaluates the signal to operate various functions.