dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 2103 > < Component Tests and General Diagnostics|Page 2101
Page 256
background image

YES: Go to Step 2.
NO: Solve the problem first. Refer to Inspection Procedure F-1.

STEP 2. Check sunroof motor assembly connector D-08 and ETACS-ECU connector C-313 for damage.

Q: Are sunroof motor assembly connector D-08 and ETACS-ECU connector C-313 in good condition?

YES: Go to Step 3.
NO: Repair or replace them. Refer to Harness Connector Inspection. The input signal from the sunroof switch should be able to be checked and the
sunroof should work normally.

STEP 3. Check the harness wires between sunroof motor assembly connector D-08 and ETACS-ECU connector C-313.

NOTE:  After checking intermediate connector C-28 and joint connector C-141, check the wires. If intermediate connector C-28 and joint connector
C-141 are damaged, repair or replace them. Refer to Harness Connector Inspection.

Q: Are the harness wires between sunroof motor assembly connector D-08 and ETACS-ECU connector C-313 in good condition?

Component Tests and General Diagnostics|Page 2103 > < Component Tests and General Diagnostics|Page 2101