Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
Control Assembly: Service and Repair
Heater-A/C Control Replacement
REMOVAL
For removal follow steps in image and note the following:
Step 5 -- Heater Control Assembly Removal
1. Press the Lever to disconnect the air outlet change over damper cable.
2. Snap the boss and clamp with flippers or a flat-tipped screwdriver, etc to remove the heater control assembly.
NOTE: The boss and clamp are needed for assembly line at the factory, but not needed for service work.