Electrical equipment: starting
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Electrical equipment (2000 range) › Electrical equipment: starting
00 Introduction and technical dataElectrical equipment: starting · page 1 of 2
Electrical equipment: starting
| F1 STARTER MOTOR |
1242 16v 1242 16v | 1596 16v 1596 16v | 1910 JTD 1910 JTD | |
|---|---|---|---|---|
| Make | M. Marelli E80F-12V- 0.9 kW |
Bosch DW-12V-1.1 kW |
BOSCH DIAM 78.5-2.0 kW (with reduction unit) |
|
| Voltage V | 12 | |||
| Rated power kW | 0.9 | 1.1 | 2.0 | |
| Rotation, pinion side | clockwise | |||
| No. of pole | 4 | 6 | 6 | |
| Energizing | series | permanent magnets |
||
| Engagement | free wheel | |||
| Operation | solenoid | |||
| Endfloat of armature shaft mm | 0.1-0.5 | |||
| Data for bench test | ||||
| Operating test (*): current A speed rpm voltage V torque developed daNm |
180 (200) 1720 (2200) 9.5 (9.8÷10) 0.37 (0.38) |
– – – – |
500 1950 7.30 1.30 |
|
| Engagement test (*): current A voltage V torque developed daNm |
324 (440) 7.1 (7.6 ≥0.97 (≥1.25) |
– – – |
1200 5.5 3.0 |
|
| Free running test (*): current A voltage V speed rpm |
40 (44-48) 11.4 (11.4-11.5) 8500-9000 (11400-12300) |
– – – – |
70-80 11.5 5450-5750 |
|
| Relay Winding resistance (*) |
pull in Ω | 0.30-0.32 (0.32) | – | 0..4 |
| hold in Ω | 1.2-1.3 (1.09) | – | 1.7 | |
| Lubrication | ||||
| Internal engagement splines and shaft bushes | VS+ SAE 10W | |||
| Engagement sleeve and intermediate disc | TUTELA MR3 | |||
(*) Data obtained at a temperature of 20°C.
NOTE When overhauling it is not necessary to undercut the insulator between the commutator bars.
Parts & tools for this job For 1995 Fiat Bravo
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.