Description (page 4 of 4)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Engine (2000 range)
00 Introduction and technical dataDescription · page 4 of 4
| DESCRIPTION | 1242 8v | 1596 16v |
|---|---|---|
| Values in mm | ||
| 17 Cam lift | 7.5 | 8.5 |
| 7.5 | 8 | |
| 12 17a Camshaft bearings Cylinder head supports |
Ø1 0.030-0.070 | – |
| Ø2 0.030-0.070 | ||
| Ø3 0.030-0.070 | ||
| 18 Camhaft supports in camhaft housing | Ø1 35.045-35.070 | 29.989-30.014 |
| Ø2 48.045-48.070 | 52.445-52.470 | |
| Ø3 49.045-49.070 | 52.845-52.870 | |
| Ø4 – | 53.245-53.270 | |
| Ø5 – | 53.645-53.670 | |
| Tappet housings Ø | 28.400-28.421 | 33.000-33.025 |
| 17-18 Camshaft bearings Camshaft housing supports |
– | 0.030-0.070 |
| 19 Tappet Ø | 28.354-28.370 | 32.959-32.975 |
| 19-18 Tappet - Housing in camshaft housing |
0.046-0.051 | 0.025-0.066 |
| 17-20 clearance for timing check |
0.45 | |
| Hydraulic tappets | ||
| operational clearance | ||
Parts & tools for this job For 1995 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.