Timing diagrams (page 2 of 2)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Engine (2000 range)

00 Introduction and technical dataTiming diagrams · page 2 of 2

LUBRICATION	1242 16v 16v	1596 16v 16v
	Values in mm
Engine lubrication circuit	forced circulation, via lobe geared pump with cartridge filter in series	forced circulation, via geared pump wih cartridge oil filter in series
Oil pump	lobe gears	geared, located in the crankshaft front cover
Pump operation	by crankshaft	by chain driven by crankshaft
Oil pressure relief valve	incorported in crankshaft front cover
Full flow filter	–	cartridge
Insufficient oil pressure sender unit	–	electrical
between pump casing housing and driven gear	0.100 - 0.210	–
between edge of gears and pump casing	–	0.110 - 0.180
between the upper edge of the gears and the pump cover	0.025-0.070	–
between upper edge of gears and pump casing	–	0.040 - 0.106
Full flow filter	cartridge
Insufficient oil pressure sender unit	electrical
Between drive gear and driven gear	0.030
Operating pressure at a temperature of 100°C	when idling	>0.7 bar	>1 bar
	at 4000 rpm	>4 bar	>4.5 bar
Oil pressure relief valve spring	P1	11.73 - 12.51 daN	9.0-9.8 daN
	H1	35	31

01 General