Description
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Engine (98 range) › Description
00 Introduction and technical dataDescription · page 1 of 2
DESCRIPTION
| Values in mm | ||
|---|---|---|
| Valve guide bore in cylinder head | Ø | 13.950 - 13.977 |
| Valve seats | α | 45° ± 20' |
| 45° ± 20' | ||
| L | about 2.7 | |
| Camshaft bearing housings in cylinder head | Ø1 | – |
| Ø2 | – | |
| Ø3 | – | |
| Ø4 | – | |
| L* | – | |
| Camshaft supports | Ø | 26.045 - 26.070 |
| L* | 19.100 - 19.150 | |
| Tappet housing | Ø | 37.000 - 37.025 |
(*) Cap size
Parts & tools for this job For 1995 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.