Gearbox and differential (page 2 of 2)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Engine (98 range)
00 Introduction and technical dataGearbox and differential · page 2 of 2
| DIFFERENTIAL | ||
|---|---|---|
| Ratio crown wheel & pinion reduction | 17/57 (3,352) |
20/63 (3,15) |
| Ratio at the wheels | 13,102 | 12,313 |
| 7,501 | 7,049 | |
| 4,840 | 4,548 | |
| 3,449 | 3,241 | |
| 2,731 | 2,416 | |
| 13,102 | 12,313 | |
| Differential internal casing bearing | conical roller bearings | |
| Adjustment of bearing pre-loading | by shims | |
| Thickness of shims | 1,70÷2,89 | |
| Interference to obtain exact bearing pre-loading mm | Bearings not pre-loaded = 0,12 bearings pre-loaded (350 daN) = 0,08 |
|
| Clearance btwn planet and sat. gears mm | ≤ 0,10 | |
| Adjustment of clrnce btwn planet/sat. gears | no adjustment is carried out | |
Parts & tools for this job For 1995 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.