Gearbox and differential (page 2 of 2)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Gearbox and differential
00 Introduction and technical dataGearbox and differential · page 2 of 2
| 1929 D | 1910 TD | |
|---|---|---|
| DIFFERENTIAL | ||
| Ratio crown wheel & pinion reduction | 16/57 (3,562) |
ND |
| Ratio at the wheels | 13,923 | ND |
| 7,972 | ND | |
| 5,143 | ND | |
| 3,665 | ND | |
| 2,906 | ND | |
| 13,923 | ND | |
| Differential internal casing bearing | conical roller bearings | |
| Adjustment of bearing pre-loading | by shims | |
| Thickness of shims | 1,70÷2,60 | - |
| - | 1,70÷2,89 | |
| Interference to obtain exact bearing pre-loading | mm Bearings not pre-loaded = 0,12 bearings pre-loaded (350 daN) = 0,08 |
|
| Clearance btwn planet/satellite gears | mm ≤ 0,10 |
|
| Adjustment of clrnce btwn planet/sat. gears | by shims | no adjustment is carried out |
| Thickness of shims | 0,80÷1,25 | - |
Parts & tools for this job For 1995 Fiat Bravo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.