Engine identification (page 2 of 2)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Identification data (2000 range)
00 Introduction and technical dataEngine identification · page 2 of 2
(<) Loads which should never be exceeded
(*) For 5 door version (Brava)
NOTE FOR VERSIONS WITH ACCESSORIES: If special equipment is fitted (non standard air cnoditioning, trailer towing device, etc.), the weight when empty will increase and therefore the payload may decrease in relation to the maximum permitted loads.
| WEIGHTS (values epressed in kg) |
ENGINE TYPE | 1242 16v | 1596 16v | 1910 JTD | |
|---|---|---|---|---|---|
| 3 door | 1010 | 1050 | 1170 | ||
| 5 door | 1040 | 1090 | 1195 | ||
| 🔧 | 3 door | 1510 | 1550 | 1680 | |
| 5 door | 1570 | 1630 | 1735 | ||
| Maximum permitted loads on the axles ( | 3 door | 850 | 850 | 920 | |
| 5 door | 850 | 850 | 920 | ||
| 3 door | 850 | 850 | 920 | ||
| 5 door | 850 | 850 | 920 | ||
| Maximum permissible load on the roof | 80 | 80 | 80 | ||
| Load on the tow hook ball (trailer with braking system) | Idle | – | – | – | |
| Maximum | 70 | 70 | 70 | ||
| Towable loads | Without braking system | 400 | 400 | 400 | |
| With braking system | 1000 | 1100 | 1300 | ||
Parts & tools for this job For 1995 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.