Front suspension
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Suspension › Front suspension
00 Introduction and technical dataFront suspension
Front suspension
F1
| Coil springs | 1929 D | 1910 TD | |
|---|---|---|---|
| Diameter of wire | mm | 12,5±0,05(12,7±0,05)* | 12,7±0,05(12,9±0,05)* |
| Number of turns | 3,75 | 3,75 | |
| Direction of coil | clockwise | ||
| Height of spring released | mm | 461 (454)* | 454 (449)* |
| Height of spring under a load of: | 340 ± 368 daN (352 ± 382 daN)* mm |
192 | - |
| 352 ± 382 daN (366 ± 396 daN)* mm |
- | 192 | |
| The springs are subdivided into two cate- gories, identifiable by a mark |
|||
| yellow (1) for those under a load of: |
354 daN (367 daN)* height in mm |
>192 | - |
| 367 daN (381 daN)* height in mm |
- | >192 | |
| green (1) for those under a load of: |
354 daN (367 daN)* height in mm |
≤192 | - |
| 367 daN (381 daN)* height in mm |
- | ≤192 | |
(1) Springs of the same category must be fitted.
(*) For vehicles with air conditioning
Shock absorbers
F2
| Type: telescopic, double acting (low pressure gas) |
WAY-ASSAUTO | |
|---|---|---|
| Open (start of damping action) | mm | 518 ± 2,5 |
| Closed (metal against metal) | mm | 361 ± 2,5 |
| Travel | mm | 157 |
Stabilizer bar
| Diameter of stabilizer bar | mm | |
|---|---|---|
| 23 |
Parts & tools for this job For 1995 Fiat Bravo
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Fiat Bravo 1995 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.