Coil springs
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Technical data (1998 20v) › Coil springs
00 Introduction and technical dataCoil springs
Front suspension independent, Mac Pherson type with steel track control arms anchored to an auxiliary cross member. Offset coil springs and double acting, telescopic shock absorbers. Torsion anti-roll bar.
Coil springs
| Diameter of wire | mm | |
|---|---|---|
| Diameter of wire | mm | 13,5±0,05 |
| Number of turns | 4 | |
| Direction of coil | clockwise | |
| Height of spring released | mm | 355 |
| Height of spring under a load of: | 340÷360 daN (358÷388 daN)* | 170 |
| The springs are subdivided into two categories, identifiable by a mark | ||
| yellow (1) for those under a load of: | 350 daN (373 daN)* height of mm | >170 |
| green (1) for those under a load of: | 350 daN (373 daN)* height of mm | ≤170 |
(1) Springs of the same category must be fitted.
(*) For vehicles with air conditioning
Shock absorbers
| Type: telescopic, double acting (low pressure gas) | |
|---|---|
| Type: telescopic, double acting (low pressure gas) | BOGE |
| Open (start of damping action) | mm 458,5 ± 2 |
| Closed (metal against metal) | mm 291,5 ± 2,5 |
| Travel | mm 167 |
Stabilizer bar
| Diameter of stabilizer bar | mm 23 |
Parts & tools for this job For 1995 Fiat Bravo
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Fiat Bravo 1995 shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.