Turbocharging
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Technical data (98 range) › Turbocharging
00 Introduction and technical dataTurbocharging
F1
| 1910 TD | 1910 TD | ||
|---|---|---|---|
| SPECIFICATIONS | |||
| Firing order | 1-3-4-2 | ||
| Injection pump | LUCAS DPC-FT09, electronic | BOSCH, mechanical VER-679 | |
| Injector | LUCAS | BOSCH | |
| Nozzle holder | LCD 011R02AA1 (*) LCR 6705344 |
BOSCH KCA 30S41 | |
| Nozzle | LUCAS RND 05DC6897 | BOSCH DN 0 SD 321 | |
| Injector setting pressure | 143-150 bar | 150-158 bar | |
| Injection pump timing adjustment: pump piston travel with cylinder no.1 at TDC (compression stage) | Electronic adjustment | 0.92 mm | |
| Engine idle speed | 870-930/min | 830-870/min | |
| Top engine speed with no load | 4920-5020/min | 5000-5100/min | |
(*) Signal injector installed on cylinder no. 1
TURBOCHARGING
Turbocharger operated by exhaust gases with waste-gate pressure valve and air/air heat exchanger (intercooler)
F2
| Turbocharger: type | Garrett GT 15 | |
|---|---|---|
| Maximum turbo boost pressure | < 1.05 bar | 0.950 bar |
Cross section through turbocharger
Parts & tools for this job For 1995 Fiat Bravo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.