Wheels

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Wheels › Wheels

00 Introduction and technical dataWheels

Wheels

WHEEL GEOMETRY

Front suspension	camber (**)	-7' ± 30' -33' ± 30' (only for Bravo 1998) -9' ± 30' (●●)
	caster (**)	3°30' ± 30' 2°50' ± 30' (●) 2°18' ± 30' (●●)
	toe in	-1 ÷ 1 mm
	front wheel offset ▲	0°
Rear suspension	camber (**)	-1° ± 0°30' - 0°46' ± 30' (from chassis no. 4.050.320)
	toe in (**)	-2,5 ÷ 1,5 mm 0 ÷ 4 (from chassis no. 4.050.320)
	rear wheel thrust angle ▲	0°

(**) Angles cannot be adjusted

(■) With tyres inflated to the correct pressure and vehicle in running order with 5 litres of fuel

(▲) Angular values which cannot be adjusted, used for the correct alignment of the vehicle

(●) Versions with power assisted steering and for Bravo 1998

(●●) For versions with 1910 TD 75 engine

01 General