Wheel geometry

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Wheels (2000 range) › Wheel geometry

00 Introduction and technical dataWheel geometry

WHEEL GEOMETRY

Front suspension	camber (**)	-7' ±30'
	caster (**)	2°50' ±30'
	toe in	-1 ÷ 1 mm
	Offset front wheels (▲)	0°
Front suspension	camber (**)	-0°46' ±30'
	toe in (**)	0-4
	Thrust angle rear wheels (▲)	0°

(**) Angles cannot be adjusted

(■) With the tyres inflated to the correct pressure and the vehicle in running order with 5 litres of fuel

(▲) Angular values, which cannot be adjusted, used for the correct alignment of the vehicle

01 General