Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Operation in ICE mode

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Components and operation (Automatic) › Operation in ICE mode
21 Gearbox and differentialOperation in ICE mode

Operation in ICE mode

The ICE mode can be selected by pressing the ICE pushbutton located on the right of the selector lever, when the latter is at position D. This strategy improves driving safety on slippery roads by ensuring that the vehicle sets off gently by selecting 2nd gear on departure.

When the ICE mode is selected, the lock-up clutch is not locked.

Graph showing Gear change program with Apertura farfalla on Y-axis (0-100%) and speed in Km/h on X-axis (10-230), illustrating gear shift points for 3→2, 4→3, 2→3, and 3→4.

The ICE mode is excluded in the following cases:

  1. if the NORMAL/SPORT button is pressed;
  2. if the selector lever is at a position other than D;
  3. if the engine is switched off;
  4. if the transmission fluid temperature is over 150°C;
  5. operation under recovery conditions.

The table below illustrates the ratios which the gearbox uses automatically while the vehicle is driving, in relation to the driving mode used and the selector lever position, and shows the transmission ratio used on departure.

Selected
driving
mode
Selector
lever
position
Ratio
selected on
departure
Automatic management
1 2 3 4
NORMAL D 1st ←→
3 1st ←→
2 1st ←→
1 1st
SPORT 3 1st ←→
2 1st ←→
1 1st
ICE D 2nd ←→

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.