Hydraulic system

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Hydraulic system › Hydraulic system

33 Braking systemHydraulic system · page 1 of 3

- remove the attachment buttons (1) and (2) on the sound-proofing panel;

NOTE The button (1) cannot be reused, so during assembly, after fitting the plate (3), a new button should be fitted.

The sound-proofing panel need not be fully removed; it is sufficient to move it over to the right to permit access to the servo unit's attachment nuts.

- withdraw the split pin to release the servo unit pushrod from the pin located on the pedal;

- undo the servo unit nuts (arrowed) from the pedal assembly mounting;

05 General