Dismantling

Dismantling

Carry out the following operations:

• undo the screws (arrowed) which secure the bottom and side (right) of the heater-distributor unit’s cover (1);
• undo the three bolts (2), taking care not to lose their nuts inserted in the seatings in the split connector (3) of the heater radiator;
• remove the plate (4) and disconnect the two metal pipes (5) from the split connector of the heater radiator (3), and disengage the metal pipes from the unit;
• unplug the connectors (6 and 7) from the resistor (8) and fan (9) respectively;
• undo the screw (10) and after lifting the tab (11), rotate the base (9) supporting the electric fan anti-clockwise as far as the stop (12), and withdraw the fan from the assembly;
• undo the two screw (13) and withdraw the resistor (8) from the duct;